How to Change the Oil in Your Car (with Pictures) - wikiHow (2024)

Download Article

Explore this Article

parts

1Elevating the Vehicle

2Draining the Oil

3Replacing the Oil Filter

4Adding New Oil

5Disposing of Oil

+Show 2 more...

-Show less...

Other Sections

VideoWATCH NOW

Things You'll Need

Tips and Warnings

Related Articles

References

Article Summary

Co-authored byAlexander Douglas

Last Updated: January 29, 2024Fact Checked

Download Article

ARTICLE

VIDEO

Regularly changing your car’s engine oil and filter are some of the most important things you can do to keep your car running well. Over time, your oil will break down and your filter will become clogged with contaminants. Depending upon your driving habits and type of vehicle, this may take as few as 3 months or 3,000 miles (4,800km), or as long as 20,000 miles (32,000km) or 24 months. Fortunately, changing your oil is both easy and inexpensive, so the sooner you change the oil in your car if it needs it, the better.

Get Car Support Solve Any Problem

How to Change the Oil in Your Car (with Pictures) - wikiHow (3)

Hi there! Do you have a question about how to diagnose or fix a problem with your car? I’ve read the manual so you don’t have to. Select your make, model, and year, then ask away!

*

*

Part 1

Part 1 of 5:

Elevating the Vehicle

Download Article

  1. How to Change the Oil in Your Car (with Pictures) - wikiHow (5)

    1

    Park the car on a flat surface. Pull the car into a garage or park it on a level spot in your driveway. Make sure that the ground is level and that you have enough working area on all sides of the vehicle. Place the car in park, remove the keys and apply the parking brake. Leave the car idle for 5–10 minutes to let the oil cool down.[1]

    • If you neglect to let the car sit, you could scald yourself when you drain the oil.
  2. How to Change the Oil in Your Car (with Pictures) - wikiHow (6)

    2

    Jack up the vehicle by placing your car jack beneath the jacking point. Situate your car jack beneath the chassis near the front of your car. Insert the square-shaped end of the metal crank into the square-shaped receptacle. Rotate the crank clockwise to jack up your car so its front is about 18 inches (46cm) off of the ground. This will give you plenty of space to work underneath the car.[2]

    • If you are unsure of the location of the jacking point on your vehicle, check the owner’s manual for specifics.

    Advertisement

  3. 3

    Drive your vehicle up onto steel ramps if you don’t have a jack. Some people prefer to use steel ramps (rather than a jack) when they’re changing their oil. Situate the 2 ramps as far apart as your vehicle’s wheels are. This is typically about 4 feet (1.2m). Drive your vehicle forward until it’s at the top of the ramps. The wheels should sink down into depressions at the top of the ramps which will hold the vehicle in place,[3]

    • Ramps give you 2 points of suspension on your vehicle rather than just 1. They’re commonly used in mechanics’ shops for this reason.
    • Driving your vehicle up onto the ramps won't take more than 10 seconds and so shouldn't heat up your engine much. Som it's okay to do this right before you start changing the oil.
  4. How to Change the Oil in Your Car (with Pictures) - wikiHow (8)

    4

    Place a wheel block behind 1 rear tire to restrain the vehicle. Whether your car’s held up by a vehicle jack or you drove it onto ramps, the last thing you want is for it to roll away while you’re working on it. So, place a piece of wood or other wheel block behind a rear wheel to keep the car in place. If the surface where you’ve parked the car is on a slight angle, play it safe and place a block behind both rear wheels.[4]

    • Push down on the hood 2 or 3 times to make sure that the vehicle is stable and won’t crash down on you as you’re working beneath it. If the car is unstable, it's probably not evenly jacked up or situated on the ramps. Lower the car (or drive down off the ramps), make a couple adjustments and try lifting it again.
  5. Advertisement

  1. How to Change the Oil in Your Car (with Pictures) - wikiHow (10)

    1

    Place the oil drain pan underneath the engine drain plug. Crouch down and look beneath the vehicle. The oil engine drain plug will be located within 1–2 feet (0.30–0.61m) of the front of the vehicle, and sits directly beneath the engine. It’s on the bottom of a large tank referred to as the oil pan. Slide the drain pan beneath the engine drain plug until it’s centered in place.

    • The oil drain pan should hold at least twice as much oil as your engine takes, so that none of the liquid will spill over the sides of the pan when it’s pouring out of the car.
  2. How to Change the Oil in Your Car (with Pictures) - wikiHow (11)

    2

    Remove the oil cap by unscrewing it counterclockwise. Open the vehicle’s hood and locate the oil cap on top of the engine. The cap will be about 2 inches (5.1cm) across and should have an oil symbol (or have the word “oil”) on top. Grasp the cap firmly in 1 hand and twist it counterclockwise to unscrew it. Set the oil cap somewhere nearby where you won’t forget it or lose track of it.[5]

    • Removing the oil cap before you drain the oil will allow the liquid to drain out quickly, since it will have airflow both above and below it.
  3. How to Change the Oil in Your Car (with Pictures) - wikiHow (12)

    3

    Unscrew the oil plug with a socket or crescent wrench. Loosen the plug counterclockwise using the proper sized socket. If there's enough room to maneuver, you could use a larger crescent wrench. To avoid getting oil all over your arm when removing the drain plug bolt, apply inward force (as if you are trying to push the plug back into the hole) while removing it. When you know that bolt is fully unscrewed, quickly pull it away from the opening. If you’re lucky, only a few drops will get on your hand.[6]

    • You’ll find a metal washer between the oil pan and the drain plug. Remove this as well and set it on the ground next to you.
  4. How to Change the Oil in Your Car (with Pictures) - wikiHow (13)

    4

    Wait several minutes for all the oil to drain out of the car. Once you’ve opened up the oil pan’s drain plug, the oil will drain out relatively quickly. However, since it’s a thick liquid, it won’t all come out at once. Wait 2–3 minutes to make sure it’s fully drained. When the oil has stopped running out of the crankcase, replace the plug.[7]

    • Put the washer that you removed earlier back in place. Then reinsert the drain plug and tighten it back in the oil pan by turning it clockwise.
  5. Advertisement

Part 3

Part 3 of 5:

Replacing the Oil Filter

Download Article

  1. 1

    Locate the filter assembly under the vehicle’s hood. Filters are not put in a standard position, so they can be on the front, back or side of the engine depending on the model. Typically, oil filters are white, blue, or black cylinders. They’re about 4–6 inches (10–15cm) long and 3 inches (7.6cm) wide, like a big soup can.[8]

    • Look at the replacement filter you purchased to have some idea of what to look for.
    • Some vehicles such as BMWs, Mercedes, and newer Volvos may have a filter element or cartridge as opposed to the simpler spin-on type. They require you to open the cap of a built-in reservoir and lift out the filter element itself.
  2. How to Change the Oil in Your Car (with Pictures) - wikiHow (16)

    2

    Twist the oil filter counterclockwise to remove it. First, try by hand to get a good grip and twist slowly and steadily, counterclockwise. If you are unable to remove the filter by hand, you will need an oil filter removal tool to do this. Make sure the drain pan is underneath the filter before fully removing the filter. This will help prevent spillage.[9]

    • Make sure the pan is still under the car catching the spilling oil. There will be some trapped in the filter that will come out when you unscrew it.
    • To avoid spilling too much oil as you remove the filter, you can wrap a plastic bag around the filter, which will catch any oil that escapes as you remove it. Let it sit upside down in the bag to drain as you complete the job.
  3. How to Change the Oil in Your Car (with Pictures) - wikiHow (17)

    3

    Rub oil on the gasket to prepare the new filter. Dip the tip of 1 finger in the new replacement oil. Smear a thin layer of the new oil onto the gasket ring of the new filter. This will lubricate the gasket and create a good seal for the new filter, and ensure that you’ll be able to get the oil filter off the next time.[10]

    • You can also pour a 20-30 drops of oil into the filter prior to installing it. This will reduce the amount of time your car takes to regain proper oil pressure.
    • If your filter is mounted vertically, you may be able to fill it almost to the top. If it's mounted at an angle, then a small amount of oil will spill just prior to spinning the filter on if you've filled it too full.
  4. How to Change the Oil in Your Car (with Pictures) - wikiHow (18)

    4

    Screw the new, lubricated filter carefully into place. Oil filters tend to have delicate threads, so as you turn the filter clockwise to screw it into place, be careful to not cross the threads. In most cases, you’ll tighten the filter until the gasket touches, then a quarter-turn more. Once the filter is in place, you’re ready to add new oil to the engine.[11]

    • The filter will generally say how tight to tighten it; look to the specifications on the box for more specific instructions.
  5. Advertisement

Part 4

Part 4 of 5:

Adding New Oil

Download Article

  1. How to Change the Oil in Your Car (with Pictures) - wikiHow (20)

    1

    Pour new oil into the car at the fill hole. The oil cap should still be off and set safely to the side. Unscrew the top from the oil jug and hold the bottle with the spout on top (facing you). Holding the bottle this way will let the oil pour out more smoothly, without bubbling. Turn the oil jug over in 1 swift motion, and stick the tip of the bottle into the engine’s fill hold. Try to spill as little oil as possible.[12]

    • The amount of oil that you need is in the owner’s manual, usually listed under “capacities.” Make sure you’re adding the correct oil. Typically, you can safely add 10W-30 to most cars in a pinch, but you should consult your owner’s manual or the experts at an auto shop before adding oil.[13]
  2. How to Change the Oil in Your Car (with Pictures) - wikiHow (21)

    2

    Replace the fill cap in the engine. Remove the emptied oil jug and screw the fill cap back in the oil fill hold. Turn it clockwise until it’s fully tightened to prevent any oil spillage. Check around for any loose tools you might have left around and close the hood. It’s a good idea to wipe up any spills as best you can, or to rinse off spilled oil with water.

    • Look under the car to make sure nothing is leaking. While it’s not dangerous to get a little oil on the crankcase as you’re pouring, it may smoke as the engine heats up, leading to that burning oil smell that can be momentarily frightening. It can also make your interior smell bad.

    How to Change the Oil in Your Car (with Pictures) - wikiHow (22)

    How to Change the Oil in Your Car (with Pictures) - wikiHow (23)Feel empowered to change your own oil. "I used to feel intimidated by the idea of changing my own oil. But this article’s straightforward visual walkthrough made the process seem totally doable. Now, I feel confident I can handle this routine maintenance task myself. It’s empowering to gain the skills to properly care for my vehicle." - Kram C.

    How to Change the Oil in Your Car (with Pictures) - wikiHow (24)Grasp every step from start to finish. "With clear instructions and photos illustrating each part of the process, I went from knowing nothing about oil changes to understanding exactly what to do. From parking the car to disposing of old oil, this article mapped it out beautifully. I especially appreciated the tips on selecting the right oil." - Kalivaradhan P.

    How to Change the Oil in Your Car (with Pictures) - wikiHow (25)Change oil more efficiently, thanks to pro tips. "As a first-timer, the pro tips helped me avoid common mistakes like getting burned by hot oil or stripping the filter threads. Following the advice to lubricate the gasket and remove the fill cap early on, let me complete the oil change faster and more efficiently. Little details like that made a big difference!" - Suzanne E.

    How to Change the Oil in Your Car (with Pictures) - wikiHow (26)Maintain your vehicle independently. "I want to take good care of my car but always relied on shops for oil changes. Now, I can handle this routine maintenance myself thanks to the detailed guidance. Doing it myself saves money, and I like knowing exactly what goes into my car. This article empowered me to maintain my vehicle independently." - Mxolisi S.

    How to Change the Oil in Your Car (with Pictures) - wikiHow (27)Have a story our readers should hear? Share it with 1 billion+ annual wikiHow users. Tell us your story here.

  3. How to Change the Oil in Your Car (with Pictures) - wikiHow (28)

    3

    Start the engine and check the oil pressure light. If the “check oil pressure” light is lit after starting up the car, you may not have put in enough oil or some may be leaking out. Leave your car in park or neutral with the parking brake on and look carefully under the car to check for any leaks or drips. If the filter and drain plug aren’t tight, they may leak slowly. Run the engine for a minute or so to get the pressure up and ensure you’ve installed everything correctly.[14]

    • If you spot a leak, turn the engine back off and let it cool for about 10 minutes. Then crawl back under the vehicle and tighten the fill cap underneath the car. This is the most likely spot that oil will leak out from.
  4. How to Change the Oil in Your Car (with Pictures) - wikiHow (29)

    4

    Check oil levels by pulling out the dipstick. Once the vehicle has been turned off again and the oil has settled for 5 to 10 minutes, recheck the dipstick to ensure that the levels are where they need to be. If the vehicle is still low on oil, pour in another ounce. Wait another 5 minutes, and check the dipstick again.[15]

    • The dipstick should have markings on it near the end that indicate when the oil level is both “low” and “full.” Different sides of the stick may give levels for both hot and cold oil.
  5. Advertisement

Part 5

Part 5 of 5:

Disposing of Oil

Download Article

  1. 1

    Transfer the oil to a sealable waterproof container. Now that you’ve changed your oil, it’s time to pour the sludgy gunk into a more permanent container. Adding it to the newly emptied oil container you’ve just emptied is the safest bet. Put the tip of a plastic funnel in the bottle and pour the oil slowly to ensure you don’t spill any. Clearly mark the bottle “used engine/motor oil” so you don’t mistake it for the real thing or cooking oil.

    • Other options include old milk jugs, windshield washer-fluid jugs, or other plastic bottles. Be very careful anytime you’re using old food bottles to clearly mark the contents so no mistakes are made. Carelessness here can cause inadvertent consumption or disposal.
    • Don’t put old oil in containers that held chemicals like bleach, pesticides, paint, or antifreeze. These will contaminate the recycling process.
  2. 2

    Find a designated oil-collection site near you. Don’t just pour the old motor oil down the drain, and never pour it out on your yard or in the garbage! It needs to be disposed of safely. Typically, all places that sell motor oil will be able to point you towards an oil-collection site. Many service stations that do oil changes will also take your used oil, though sometimes for a small fee.

    • If you need to dispose of the old filter, you can do that at most large automotive suppliers. In some locations, for example, retailers that sell more than 1,000 filters in a year are required to accept old filters.[citation needed] There are also facilities that accept all sorts of hazardous and valuable waste for special disposal, including electronics, scrap metal, and chemicals (e.g. motor oil and paint); research to see if any are in your area.
  3. 3

    Try recycled oil the next time your car needs an oil change. Used motor oil is refined until it meets the same certifications and specifications of virgin oil. The process requires less energy than pumping and refining new oil and recycling motor oil helps to reduce the need of foreign oil imported. In some cases, recycled oil also costs less than “new” oil.

    • Next time you’re shopping for oil at a local auto-parts store, ask if they sell recycled oil.
  4. Advertisement

Expert Q&A

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

      Advertisement

      Video

      Things You’ll Need

      • 4–6 litres (1.1–1.6USgal) of oil
      • Socket wrench
      • Oil filter
      • Oil filter wrench (optional)
      • Ramps or a jack stand
      • Pan to catch the used oil in
      • Funnel
      • Jug to transport oil
      • Oil rags or paper towel

      Tips

      • If you’re not sure how often your oil should be changed, consult your owner’s manual for service intervals.[16] Make sure you use oil that meets the API performance rating for your vehicle. Most vehicles made since 2004 require rating “SM”, which is better than the oil that was available when older cars were made.

        Thanks

        Helpful0Not Helpful0

      • Use disposable nitrile gloves. The used motor oil contains many toxic contaminants and can be easily absorbed through your skin.

        Thanks

        Helpful6Not Helpful7

      • There are some oil drain valves on the market that replace your normal drain pan bolt. These can make oil changes much more convenient and can reduce the amount of mess you make.

        Thanks

        Helpful0Not Helpful1

      Show More Tips

      Submit a Tip

      All tip submissions are carefully reviewed before being published

      Submit

      Thanks for submitting a tip for review!

      Advertisement

      Warnings

      • Be careful not to burn yourself. Your engine, the used oil inside it, and other parts of the car can stay hot enough to burn you for a long time after you turn the ignition off.

        Thanks

        Helpful46Not Helpful25

      • Don’t get the oil inlet confused with the transmission fluid inlet. You can ruin your transmission if you put oil in it.

        Thanks

        Helpful0Not Helpful1

      Advertisement

      You Might Also Like

      How toTroubleshoot Leaking OilHow to Remove Car Paint
      How toChange the Oil and Oil Filter on a MotorcycleHow toChange Spark Plugs in a CarHow toInspect Your Suspension SystemHow toFix a Car That StallsHow toSwitch the Wheels on a CarHow toStore a CarHow toChange a Car BatteryHow toChange a Fuel FilterHow toChange Your Air FilterHow toRemove the Drain Plug in a Car to Change OilHow toPump Your Own GasHow toAdd Oil to Your Car

      Advertisement

      More References (7)

      About This Article

      How to Change the Oil in Your Car (with Pictures) - wikiHow (46)

      Co-authored by:

      Alexander Douglas

      Auto Mechanic

      This article was co-authored by Alexander Douglas. Alexander Douglas is a mechanic at Planet Auto in California. He has been a mechanic since 1997 and is ASE (Automotive Service Excellence) certified. This article has been viewed 2,061,546 times.

      59 votes - 91%

      Co-authors: 135

      Updated: January 29, 2024

      Views:2,061,546

      Categories: Featured Articles | Vehicle Fuels and Fluids

      Article SummaryX

      To change the oil in your car, start by parking your car on a level surface and putting on the parking brake. Jack the car up, place the oil drain pan underneath the engine, then give your engine about 10 minutes to cool down. Once it's cool, remove the oil plug underneath your car and allow the oil to drain out into the pan. Then, unscrew the old oil filter and screw in a new, lubricated replacement. Consult your owner's manual to see how much and what kind of oil your car takes, then add the new oil to the fill hole. To learn more from our Mechanic co-author, like how to get rid of your car's old oil, keep reading the article!

      Did this summary help you?

      In other languages

      Spanish

      French

      Dutch

      Russian

      Chinese

      Indonesian

      Arabic

      Hindi

      Thai

      • Print
      • Send fan mail to authors

      Thanks to all authors for creating a page that has been read 2,061,546 times.

      Reader Success Stories

      • How to Change the Oil in Your Car (with Pictures) - wikiHow (47)

        Suzanne E.

        Feb 5, 2017

        "As a first-timer, the pro tips helped me avoid common mistakes like getting burned by hot oil or stripping the..." more

      More reader storiesHide reader stories

      Did this article help you?

      Advertisement

      How to Change the Oil in Your Car (with Pictures) - wikiHow (2024)

      FAQs

      Can I change oil in car myself? ›

      This really depends on your vehicle, but an oil change is typically one of the more simple maintenance items you can do in your garage. All cars are different, and some vehicles are easier than others.

      What does it look like when your car needs an oil change? ›

      If your oil looks brownish and/or has lots of particles in it, then it's time to visit your local dealer for an oil change. If your oil looks pitch black, then it's definitely past time to get an oil change. Your engine oil is thoroughly worn out and, if used past this point, could potentially cause engine damage.

      What is the best way to change engine oil? ›

      10-Step Oil Change Instructions:
      1. Raise the vehicle. ...
      2. Position catch pan and remove plug. ...
      3. Inspect vehicle while all oil drains. ...
      4. Reinstall drain plug and torque. ...
      5. Remove old oil filter. ...
      6. Clean mount and remove old O-ring. ...
      7. Lube new filter and attach by hand. ...
      8. Remove oil fill cap and add new oil.
      Apr 12, 2018

      How does a car act when it needs oil? ›

      However, when the fluid starts to break down, it doesn't lubricate the parts as well so you'll hear louder engine noise. If you ignore the increased engine sounds, you'll start to hear knocking, rumbling, and even roaring to let you know that your vehicle is in dire need of an oil change.

      What are the symptoms of dirty engine oil? ›

      Signs of Dirty Engine Oil
      • Checking your dipstick for the color of your oil as well as the oil level.
      • Hearing sounds like knocking or louder engine performance in general.
      • Oil smells within the cabin.
      • Noticing a smokier exhaust.

      What to look for when changing oil? ›

      Look for brown or black color. If the oil is a light, milky color, or if you notice tiny metal particles, take your vehicle to a mechanic for further diagnosis.

      What happens if you put too much oil in your car? ›

      Adding too much engine oil in the car can cause the oil to froth and create air pockets, preventing it from properly lubricating the engine components. As a result, your engine may experience increased wear and tear and decreased power and efficiency.

      How to check if car oil is good or bad? ›

      1. Step 1: Pre-check Prep.
      2. Step 2: Locate the Dipstick.
      3. Step 3: Pull and Clean the Dipstick.
      4. Step 4: Take a Reading.
      5. Step 5: Wait and Re-check.
      Jun 27, 2024

      Where is the oil drain plug located? ›

      The drain plug is a large nut or plug located under the oil pan at the bottom of the engine. If you can't reach your oil drain plug easily, you'll have to either crawl under your car to reach it or jack up the car.

      Do I need to run car before oil change? ›

      Changing The Oil

      Whenever possible, you should jack up the vehicle or drive it onto steel ramps and put a wheel block behind one rear tire. It's also advisable to start the engine and let it warm up for 2-3 minutes, as this helps the oil heat up and allows it to drain more easily.

      How much oil do I put in my car when I change it? ›

      Well, that depends on your vehicle's engine. Many engines will take between five to six quarts, although some small four-cylinder engines may need closer to four quarts. On the other hand, bigger engines can take up to eight or nine quarts.

      How to fully drain engine oil? ›

      Loosen the drain plug using a box-end wrench or 6-pt. socket. Carefully remove the plug by hand, making sure the catch pan is underneath the plug hole. Oil will flow rapidly from the hole, but allow several minutes for all old oil to drain out.

      References

      Top Articles
      Latest Posts
      Recommended Articles
      Article information

      Author: Saturnina Altenwerth DVM

      Last Updated:

      Views: 5852

      Rating: 4.3 / 5 (64 voted)

      Reviews: 95% of readers found this page helpful

      Author information

      Name: Saturnina Altenwerth DVM

      Birthday: 1992-08-21

      Address: Apt. 237 662 Haag Mills, East Verenaport, MO 57071-5493

      Phone: +331850833384

      Job: District Real-Estate Architect

      Hobby: Skateboarding, Taxidermy, Air sports, Painting, Knife making, Letterboxing, Inline skating

      Introduction: My name is Saturnina Altenwerth DVM, I am a witty, perfect, combative, beautiful, determined, fancy, determined person who loves writing and wants to share my knowledge and understanding with you.